felt roll production line

A、The incoming rolled felt needs to pass through a double-roll shredder to allow the felt fibers to fully expand, resulting in smoother winding and less breakage (the shredder is only for rock wool rolled felt; glass wool rolled felt does not need to go through a shredder. If the incoming material is already in rolls, a shredder is not required ) .

B、After the felt roll is unrolled, the hot-melt foil application process is completed with the cooperation of the heating roller and the foil application / cutting conveyor section, and the material is automatically cut to the specified length. The pressing conveyor can be adjusted up and down according to the thickness of the material to prevent slippage during the forward conveying process.

C、 After the foil is applied, the rolled felt completely falls into the transition conveyor section (the length of this conveyor section depends on the maximum length of the rolled felt being produced; that is, the longer the material, the longer the conveyor section. Otherwise , it will affect the success of subsequent winding ) .

D、 The plastic film conveying section completes the film covering work; the plastic film cutting system completes the timed film cutting .

E、 The winding machine accelerates the winding process to achieve the functions of winding and leaving enough working space for subsequent incoming materials.